GMD4

Specialty & Glass Door Style

Construction: 3/4″ frame with Cope & Stick, HDF or Mitered joints. Frame will match frame of door style ordered. *Check Door Style Specifications page for availability

Featured Finish: Honey Maple on Alder | Gluechip Glass Insert

WOODS + MATERIALS

Materials to Match Specified Door Style

Glass is shipped separate and field installed in door opening(s).
Specify glass type. Example: GMD4 – Reeded
Door also available in ‘prep for glass’ option

Note: Generally if the height exceeds approximately 1.5 times the width then a double high “X” pattern is required. If the height exceeds approximately 2.5 times the width then a triple high “X” pattern is required. Width of the door cannot exceed the height.

For a large single “X” pattern, the minimum width is 14″ on 2-1⁄4″ Stile and Rail Door and only available with SR20, SR30, SR35, and SR80.

Disclaimer: Please be aware that the accuracy of color shown on your computer screen will vary based on your monitor and screen resolution. Colors are also impacted by variations in the characteristics inherent to the specie. Finish selections should always be made after sourcing door and/or finish samples. Seville’s finish program is here to help personalize your selection to achieve the desired performance and look of your cabinetry. Your choices, your lifestyle.

Beauty is in the details...

Widths & Heights

Size Limitations:

2-1/4" Rails & Stiles
GMD4 L/R Door:
Width: Min: 14"
Max: 24"
Height: Min: 14"
Max: 48" (62" maximum with mid rail / 2 panels)

3" Rails & Stiles
GMD4 L/R Door:
Width: Min: 15-1/2"
Max: 24"
Height: Min: 15-1/2"
Max: 48" (62" maximum with mid rail / 2 panels)

GMD4 doors are not available below the minimum width/height sizes. Doors requested above the Max size (or without a mid rail) may be allowed at Seville Cabinetry’s discretion but will not be covered under the Warranty.

Inside Edge Options